S2Konnect N-2020T Bedienungsanleitung PDF herunterladen (Seite 9)

S2Konnect N-2020T

Connection of the S2Konnect Network Card

This chapter describes the physical connection of the S2Konnect N-2020T 10/100/1000Base-T

Network Interface Card to a network system.

Transmission Distances

All ports of the N-2020T are supporting 10/100/1000BaseT connections on Copper Category 5

unshielded twisted pair cable with a maximum distance of 100m.

Connection to the Network

You can connect the S2Konnect N-2020T 10/100/1000Base-T Network Interface Card to a

network station or even uplink them to a network server. Thus, by connecting smaller network

segments through a switch you can expand the transmission range of your overall network.

In order to connect the S2Konnect Network Card to a network, proceed as follows:

1. If possible, disconnect Switches from the power supply.

2. At one end of the cable connect the RJ-45 connector to the port on the S2Konnect

Network Card.

Figure 1. Connection of the RJ-45 / plug

LINK

ACT

1000

100

Port B

Port A

1 2 3 4 5 6 7 8 9 10 11 12 13 14 ... 19 20

Keine Kommentare

S2Konnect N-2020T Bedienungsanleitung Seite 9